HOTLINE:
86-15268863399
 Large Power Laser Cutting
years of concentration
news
location
Laser cutting features
Source: | Author:pmt22d4f9 | Publish time: 2018-12-12 | 7 Views | Share:

Compared with other thermal cutting methods, laser cutting is characterized by high cutting speed and high quality. Specifically summarized as the following aspects.
(1) Good cutting quality
Laser cutting can achieve better cutting quality due to the small laser spot, high energy density and fast cutting speed.
1 The laser cutting slit is narrow, the slits are parallel and perpendicular to the surface, and the dimensional accuracy of the cut parts can reach ±0.05mm.
2 The cutting surface is smooth and beautiful, the surface roughness is only a few tens of microns, and even laser cutting can be used as the last process. No machining is required, and the parts can be used directly.
3 After the laser is cut by the laser, the width of the heat-affected zone is small, the performance of the material near the slit is almost unaffected, and the deformation of the workpiece is small, the cutting precision is high, the geometry of the slit is good, and the shape of the slit cross-section is relatively regular. Rectangular. The comparison of laser cutting, oxyacetylene cutting and plasma cutting methods is shown in Table 1. The cutting material is a 6.2 mm thick low carbon steel plate.
(2) High cutting efficiency Due to the transmission characteristics of the laser, the laser cutting machine is generally equipped with multiple CNC working tables, and the whole cutting process can realize numerical control. During operation, it is only necessary to change the numerical control program to apply the cutting of different shapes of parts, which can perform two-dimensional cutting and three-dimensional cutting.
(3) Fast cutting speed
Cutting a 2mm thick low carbon steel plate with a power of 1200W, the cutting speed can reach 600cm/min; cutting a 5mm thick polypropylene resin board, the cutting speed can reach 1200cm/min. The material does not need to be clamped and fixed during laser cutting, which saves the fixture and saves the auxiliary time of loading and unloading.
(4) Non-contact cutting
There is no contact between the torch and the workpiece during laser cutting, and there is no wear of the tool. To machine parts of different shapes, there is no need to change the "tool", just change the output parameters of the laser. The laser cutting process has low noise, low vibration and no pollution.
(5) There are many types of cutting materials
Compared with oxyacetylene cutting and plasma cutting, there are many types of laser cutting materials, including metal, non-metal, metal-based and non-metal matrix composites, leather, wood and fiber. However, for different materials, due to their different thermophysical properties and different absorption rates of laser light, different laser cutting adaptability is exhibited. The laser cutting performance of various materials is shown in Table 2 using a CO2 laser.
(6) Disadvantages Laser cutting Due to the limitation of laser power and equipment volume, laser cutting can only cut medium and small thickness plates and tubes, and as the thickness of the workpiece increases, the cutting speed decreases significantly.
Laser cutting equipment is expensive and has a one-time investment.
Contact Us

ADD:Booth 8, Xiazhang New Steel Market, Xinhe Town, Wenling City, Zhejiang Province

TEL:86-15268863399

Contact person: Mr. Zhang

EMAIL:654845447@qq.com